Water heater & gas range repair in Southside, Farmington, NM 87401
South of the river, families keep good appliances running for years, and plenty of gas ranges and water heaters here are 15 to 25 years old. We repair them, find parts for older models, and tell you honestly when one has reached the end.
- Answered 24/7
- San Juan County
- Propane and natural gas
Farmington neighborhood
- Area
- Southside
- ZIP
- 87401
- County
- San Juan County, NM
- Shop
- 1865 E. Mojave St., Farmington
- Phones
- Answered 24/7
Quick answer for Southside
On the Southside, we mostly repair aging gas water heaters with pilot or thermocouple trouble, gas ranges with weak burners or ovens that won't light, and dryers slowed by long, older vent runs. We also work in manufactured homes, where access and venting differ. Typical repairs run $127-$383, set by the part and model. Calls are picked up 24/7, and a leaking water heater gets a tech at any hour.
Keeping 20-year-old gas appliances safe and working
South Farmington sits across the river, where the San Juan and the Animas come together. The homes are older and modest, with a good number of manufactured homes mixed in. Families here don't replace an appliance just because it's old. A gas range from twenty years back that still cooks well is worth keeping, and we agree. Most of our Southside work is getting another stretch of honest years out of appliances that were built to be repaired.
Older gas water heaters are the most urgent calls. A pilot that won't stay lit usually points to a worn thermocouple or a dirty pilot assembly. A tank that rumbles and pops is full of mineral scale from our hard water. A tank that weeps at the bottom has rusted through, and no part fixes that. We test the gas valve, thermocouple and burner, flush sediment where it helps, and tell you plainly when the tank itself has failed.
Gas ranges of that age have their own patterns: surface burners that light slowly, an oven igniter too weak to open the safety valve, a thermostat that drifts. Parts for many older models are still available, and we'll track them down by model number. Whenever gas is involved, safety comes first. If you notice a gas smell, leave the house, call the gas company or 911 from outside, and once they've made it safe, ring us about the appliance.
Manufactured homes, long dryer vents and hard water south of the river
Manufactured homes on the Southside put appliances in tighter quarters. Water heaters often sit in a closet with an outside access door, dryers vent through the floor or a side wall, and the laundry space leaves little room to work. Water heaters in these homes need the correct type for manufactured housing, and replacement parts must match. We know the layouts, carry the right fittings, and work carefully in small spaces without damaging thin wall panels or flooring around the unit.
Older site-built homes here often have dryer vents with long runs, several bends and flexible foil sections that sag and collect lint. Add fine dust from windy spring days and the vent can choke almost completely. That forces the dryer to run hot, burning out thermal fuses and high-limit thermostats. Hard, mineral-heavy water does its own damage, building scale in water heater tanks and washer inlet screens. Clearing the vent and flushing the tank often fixes the cause, not just the symptom.
What Southside families phone us about
These five calls make up most of our work on the south side of the river.
Water heater pilot keeps going out
A worn thermocouple, dirty pilot tube or failing gas control valve lets the pilot die. We clean the pilot, test the thermocouple's output, and replace the faulty part on the spot when we can.
Rumbling tank and lukewarm water
Hard water leaves a thick layer of scale on the tank bottom. We flush the sediment, test the burner or elements and thermostat, and check whether the tank is still sound.
Old gas oven won't light
A weak glow bar igniter can't draw enough current to open the oven safety valve. We measure the igniter's amp draw, replace it, and check the bake flame color afterward.
Dryer vent run clogged and hot
Long runs with sagging foil duct trap lint. We clean the full vent, replace crushed sections with rigid duct where we can, then test the thermal fuse and thermostats.
Manufactured home appliance access
Tight closets and exterior access doors change how we work. We bring compact tools and manufactured-home parts, protect the floor, and check venting and gas connections as we go.
Repairs we run most in Southside
Six services that come up again and again here. The full list is on our appliance repair page.
Crossing the river for a Southside call
The Southside is a short drive across the river from the Mojave St. shop, so we can often fit a same-day stop when the schedule allows. A leaking water heater gets a tech at any hour. For older appliances, the model tag matters even more: water heaters carry it on the tank label, ranges behind the drawer or under the cooktop. A photo of the tag lets us confirm parts are still made before we head out.
Close to Southside
We also work these nearby areas.
Southside appliance repair questions
Can you still get parts for a 20-year-old gas range on the Southside?
Often, yes. A lot of ignition, valve and thermostat parts for older ranges are still made or have approved replacements. We look up your model number before the visit. If a part truly isn't available, we'll tell you plainly and talk through your options.
Should I repair or replace a Southside water heater that's 15 years old?
If the tank is dry and the problem is a thermocouple, pilot assembly, gas valve or thermostat, repair usually makes sense. If the tank leaks from the bottom or seams, it has rusted through and needs replacing. We check both and explain which situation you're in.
Do you repair appliances in Southside manufactured homes?
Yes, regularly. Manufactured homes put water heaters and laundry into tight closets, often with exterior access doors. We bring the right parts and fittings for manufactured housing, work carefully around thin panels, and check gas connections and venting while we're there.
What should I do if my Southside water heater starts leaking at night?
Shut the cold water supply valve on top of the tank, then turn the gas control to off or the breaker off for electric units. Put towels down and phone us. Someone picks up day or night, and a leaking tank brings a tech out whatever the hour.
Appliance down in Southside?
Call any hour with the model number and what it is doing, and we will set the visit.